SafetyXChange Services
Audio Conferences & Webinars
Safety Posters
Safety Talks!
Safety Compliance
Safety Clip Art
Safety Management
Safety Awareness
Online Safety Training



NEW Free Catalogues
Seatbelt Cutters & Window Breakers
Cutters & Knives
CombiPak Knives
Protective Footwear



Partners in Safety
American Society of Safety Engineers
Canadian Society of Safety Engineering
Industrial Accident Prevention Association
National Safety Council




Press Releases
SafetyXChange Press Releases



Safety Job Board
Safety Coordinator, Red Deer/ Clairmont, AB, Details
Director of Quality/Patient Safety, New Glasgow, NS, Details
Warehouse Supervisor for our Calgary Distribution Centre, Calgary, AB, Details



SafetyXChange Poll Question
Sponsored by:
Safety Smart! Online

Watch here for upcoming polls.


SafetyXChange Webinars
Upcoming Webinars

Keep watching here for SafetyXChange webinars.

Welcome to the SafetyXChange discussion group. We invite you to use this forum to comment, share ideas, recount war stories, or simply chat with fellow safety professionals.

To create a new thread or reply to an existing one, you must open a free SafetyXChange enhanced membership account, here. All you need to do is fill out a brief application and create a username and password. After you login to your account, you can add a new thread by pressing the "New Thread" button on the main forum page. To post a reply to an existing message, hit the "Reply" button while viewing that message.

We will not disclose any information we gather about you to any third party. We reserve the right to modify or delete any offending or inappropriate posts. If you see any messages that concern you, please contact us at moderator@safetyxchange.org.


Change Management Policy
07/22/2008 10:53 - Shocked01
I am re-writing and updating our current Health and Safety Policies, but I do not have a Change Management Policy to base my update on. Can anyone please help me with a policy that I may be able to use...
Expand Thread Remove hard hat requirement
07/18/2008 11:55 - frittenh
Hello all, I am considering removing the hard hat requirement in storage/warehouse areas that has been in place for about 5 years by prior safety manager. There do not appear to be any head injury hazards...
Expand Thread OSHA 10 and 30 hour course
07/15/2008 07:57 - jpsomes
I am going to try to convince my boss to allow me to attend the OSHA 10 and/or 30 hour course. He says it costs too much. Has anyone out there taken these courses? Can I take just the 30 hour course...
Expand Thread Refuses to wear hard hat because it is too hot
07/11/2008 09:29 - Moralesd
I have an employee who refuses to wear his hard hat. It is our policy that all employees wear hard hats when in field doing work - no matter if there is an overhead hazard or not. He intentionally started...
Chocks for trucks
07/11/2008 08:17 - jilbea
Does anyone have a way of keeping their chocks from being dragged away or destroyed? I chain them to the building and they are still gone..missing. I just bought over a dozen and have several missing...
Integrating ISO 9001& OHSAS 18001
07/10/2008 10:30 - fftr651
Good day all I work for a mid size company. We are currently ISO 9001. We are going to try to become OHSAS 18001 as well. I was told it was best to integrate the two systems in one manual. Does anyone...
HAND TOOLS INPECTION CHECKLIST
07/07/2008 04:11 - spzahoor
If any one have "Hand Tools Inspection Checklist"then forward me, please. s_zahoor@ppl.com.pk spzahoor@yahoo.com
Expand Thread safety shoes
07/03/2008 06:32 - robyn7d
I need opinions on safety toe shoes vs. toe caps. Which is better? More cost-effective? etc.
Expand Thread managing osha recordables.
06/27/2008 09:44 - Safety Phil
I’m looking for some “best practices” or PowerPoint presentations on managing osha recordables.
Expand Thread Escalator - Use Safety
06/25/2008 11:15 - mross
We have been experiencing several incidents involing escalators at our Convention Center. I need to determine if escalator shutdowns can be reduced by performing an analysis to further understand stoppage...
Expand Thread Coorporate Safety Wages
06/24/2008 14:12 - stevencritchley
Hi there, just looking for estimated wage for a coorporate safet guy. Company has 200+ employees, operating extensivly in Ft McMurray, all over BC, Cuba, and now in Jabuti and the Congo. None of jobsites...
Expand Thread Voluntary Use Respirators
06/19/2008 06:03 - Kyborn33
After the inital physcial, how often is a physical to be done with an employee using a respirator voluntarly?
Expand Thread Sharp Corners on conveyors
06/17/2008 08:47 - Kyborn33
Does anyone know of a vendor that sells sleeves that would fit onto the edge of the conveyors? We currently tape on foam or used rubber matting.
Expand Thread HR - vs - Safety
06/16/2008 03:49 - lpratt
It has come to my knowledge from our corp HR that as a Safety Coordinator I am not allowed to write up safety warnings to individuals. All I may do is make a recomendation to the supervisor and I will...
Looking for Crane Cab Harness
06/12/2008 12:32 - tmledo
We are researching options to relieve ergonomic risks of our crane operators who operate in crane cabs for periods of time throughout the day. They have a really good seat, which allows them to adjust...
RESIDUAL HAZARDS
06/11/2008 20:07 - spzahoor
I HAVE HEARD ABOUT RESIDUAL HAZARDS. WHAT IS THE ACTUAL DEFINATION OF RESIDUAL HAZARDS? WHAT ARE THE EXAMPLES OF RESIDUAL HAZARDS? s_zahoor@ppl.com.pk pakistani_HSEQ_professionals@yahoogroups.com
Fed vs State Plans
06/11/2008 16:20 - jeffar
Does anyone have a document that provides the differences at a State Level from the Federal OSHA Regulations? I know TN, KY, MN, CA and other states have more stringent rules and I am looking for a document...
Expand Thread Document Control
06/09/2008 09:50 - chuckmule
Hi, Looking for a document control approval program. We currently send documents everyware for approval. Revisions are missed and approvers are not always on top of the task (approving). What works...
Expand Thread Change Management Policy
06/05/2008 10:59 - jshaw1224
Does anyone have a Change Management Policy they can share? I am specifically looking for a process to assess ohs hazards and risks related to changes to; processes, facilities, and/or equipment. Thank-you...
Expand Thread OHSAS 18001:2007
06/04/2008 10:39 - jshaw1224
Human Behavior is raised under the planning section of Hazard Identification, Risk Assessment and determining controls. How are organizations subscribing to this standard addressing human behaviour capabilities?...
Expand Thread Safety Shoes and Material Handlers
05/28/2008 08:32 - jilbea
Although it may be a little behind the times...I have recently required safety shoes for tool makers and set up employees. Now I am looking at expanding the program to include my material handlers. My...
Expand Thread Accident/Incident Form
05/28/2008 06:32 - sjones
Does anyone know where I can purchase forms to use when we have an accident or incident that needs to be investigated or reported. I am looking for some forms that the front line supervisors can use, and...
Sore Back
05/22/2008 23:06 - Totem
I hurt myself when we had a new non slip safety floor put in. I was pulling a trolley jack with approxamitly 300 Kilo weight when I got terrible pain in my legs and back was I doing wrong pulling it over...
Expand Thread Safety Incentive Programs
05/21/2008 05:59 - fftr651
Good day all; I work for a small company (100 employees). I looking for a safety incentive program that would be benificial to both the employees and the employers. I'm not looking for a program that...
Expand Thread BBS Observation Video
05/19/2008 08:28 - JoeyH
I'm looking for a general observation video. I knew of one that was just a 5 min. clip that showed an employee working in a manufacturing environment and you would let your trainees pick out the safe...
BBS Observation Video
05/19/2008 08:27 - JoeyH
I'm looking for a general observation video. I knew of one that was just a 5 min. clip that showed an employee working in a manufacturing environment and you would let your trainees pick out the safe...
BBS Observation Video
05/19/2008 08:23 - JoeyH
I'm looking for a general observation video. I knew of one that was just a 5 min. clip that showed an employee working in a manufacturing environment and you would let your trainees pick out the safe...
Expand Thread Cell Phone Policy
05/14/2008 13:57 - qsafety
We are trying to come up with a cell phone policy for our chemical manufacturing facility. This would not relate to driving, only chemical plant safety. There do not appear to be any documented cases...
Expand Thread Safety Books
05/13/2008 14:11 - safetyhawk
Anyone have suggested reading about safety programs in General Industry?
Expand Thread Train De-Railment Emergency Response Plan
05/09/2008 12:50 - ddemontbrun
Does anyone know the main steps involved in developing an ERP a train de-railment?
Expand Thread Best and worst things about being a safety manager
04/29/2008 13:42 - haresear
I'm doing some research and would be interested in what you consider to be the best and worst things about your job. Any help would be appreciated. Here's a sample: Best of... Saving lives,...
Expand Thread Powered Industrial Trucks
04/29/2008 13:09 - robyn7d
Several years ago, before my time, my company removed the overhead cage protection from a stand-up forklift. Can we get in trouble for this? Do we need to put it back on? If so, what regs state this?
Safety Management Evaluation (SME)
04/22/2008 23:48 - spzahoor
Our company organized the Safety Management Evaluation (SME) of all Fields through DuPont Safety Resource (DSR), an internationally renowned organization in Safety Management. The objective of this exercise...
Expand Thread saxies awards
04/16/2008 05:08 - claudia
are there copies of nominations from previous years available? This would assist in understanding the type of info you are looking for in a nomination.
Expand Thread CO Exposure Control Plan
04/11/2008 09:33 - terrid
Hi, Does anyone have a CO exposure control plan or a good resource to develop one? Thanks, Terri
Expand Thread Statistics Reporting Forms
04/10/2008 08:17 - Tam
I am looking for some forms for recording statistics. Does anyone know where I can find a form or if anyone would like to share their reporting form, please e-mail me. Thanks tam.r@shaw.ca
Expand Thread Bring Your Kids to Work Day
04/01/2008 05:26 - SS&E
Good Morning I am looking for safety and environmental ideas for our Bring Your Child to Work Day. This is our 5th year and it is getting harder to come up with something new. I would appreciate...
Expand Thread Art Fettig - De Pin article
03/27/2008 08:17 - Reggie Brown
Art's story regarding "De Pin" reminded me of when I worked for a company twenty plus years ago that provided safety services and I suggested that we buy a few thousand pens with our company...
Expand Thread Frequency Severity Index
03/24/2008 08:09 - fwilson
Is anyone currently using FSI for accidents and if so do you know what the national average is? I have calculated ours but I have nothing to guage agaisnt, it is not zero so we have room to improve but...
supply rubber hose
03/19/2008 19:54 - woshiswallow3
As a ISO9001 certificate company, we can supply the rubber hose with good quality and prices, if you are interested in, please visit at http://www.flexirubber.com for more information. The mainly industry...
Sound Reduction Materials
03/19/2008 08:10 - alzasagroup
Looking for some sound reduction material(s) to use around some wood planers in a construction shop - large shop so need to have something that works around the 2 base units while allowing the rest of...
Expand Thread JSA or JHA
03/12/2008 12:31 - saralee
I need to find a progrm on training employees how to use a JSA or JHA. Any help would be greatly appreciated.
Expand Thread THE MODERN WORKPLACE: Training Employees with ADHD
03/11/2008 08:33 - bziebarth
I just read the article in the Knowledge Center entitled "THE MODERN WORKPLACE: Training Employees with ADHD Part 1 of 2". Being an employee in the Safety & Emergency Response sectors with...
Expand Thread Insulation requirements
03/10/2008 11:15 - MikeTL
I have been asked to find out at which temperature of a pipe are you required to insulate it so as to prevent a possible burn injury to personnel. Is there an exact temperature at which you add insulation...
Men working in exposed areas and wind speeds
03/10/2008 06:52 - maiseymt
I am looking for specific requirements dealing with personnel working in exposed areas and wind speeds. I know about cranes, etc. Most I have found states 'high-wind'. I am looking for actual wind...
hearing impaired worker(s)
03/06/2008 12:53 - blenart
anyone have info on safety training /orientation techniques and best practises for safe work procedures/monitoring etc. towards integrating (and ensuring swp) hearing impaired (or completely deaf) employees...
Wishbone any thoughts?
03/05/2008 08:03 -
I came across this product called the Wishbone and I was wondering if anyone has heard of it or had any experience with it. It is basically a Y Lanyard with a break-away leg. I suppose it would be good...
Expand Thread Internal Auditing Tool
03/03/2008 07:21 - packersfn
Does any know or have a auditing checksheet for work instruction. Or maybe lead me inthe right direction. Thanks
Expand Thread Diabetes - Supervising Workers With
02/28/2008 10:40 - griff
Does anyone have experience supervising workers with Diabetes and if so, could you offer some suggestions? Thanks,
Expand Thread Saskatchewan Construction Regs
02/26/2008 11:48 - MikeTL
Our company is starting a construction project at our facility and I was having trouble finding a set of Saskatchewan regs that are geared strictly towards Construction, such as Construction Guidelines...
Expand Thread Hot Work Permits
02/22/2008 06:53 - Tam
Hello: I am looking for a sample/copy of a Hot Work Permit. Can anyone tell me where I can find one of these babies. Tks Tam at tpedersen@omicronaec.com
Expand Thread feminine napkins
02/21/2008 12:51 - robyn7d
Does anyone know if there are any regulations on how to dispose of used feminine napkins? Are we required to dispose of them as a biohazard or can we throw them in the trash like you would at home? Please...
Expand Thread Safety Professional
02/20/2008 12:19 - lpratt
I was ashamed to hear that you worry more about recordable accidents than the associates themselves. Yes, we would all like to get our stats down but if you are not communicating with your associates how...
Expand Thread hazards of climbing racks, other structures without ladders
02/15/2008 12:07 - honest ed
Hi, I am trying to get a handle on how big a problem the issue of employees climbing racking systems or other structures without the use of ladders is. I can't find much on the Internet. I imagine it...
Expand Thread Hazard Communication
02/12/2008 12:25 - safetyhawk
Two part question: In the event of an OSHA inspection, I'm assuming that the employer could be fined for the employees not wearing the proper PPE as outlined in the MSDS. Is this the case? If so,...
Expand Thread Behavior Based Safety Programs.
02/12/2008 11:34 - fftr651@hotmail.com
I am looking for some Behavior Based Safety programs. We are a small company that is growing very fast. Many of our larger clients request that we have a BBS component in our current program. Can anyone...
Expand Thread CUSTOM DESIGN CO2 BOTTLE
02/05/2008 21:21 -
I was talking to one of our partnership businesses last week with regards to CO2(carbon dioxide) cylinders. We were curious to know if it would be possible to design CO2 bottles that our customers could...
Expand Thread Clean Safety Jokes
02/01/2008 09:00 - safetyhawk
I've looked high and low for work appropriate safety jokes that don't poke fun at "the safety guy". Any help is much appreciated. Thanks!
Expand Thread Supervisor Accountability in Safety
01/16/2008 11:44 - buggsie56
Does anyone have a program that they can share that deals with Supervisor Accountability in Safety? I need something that measures how a supervisor is doing that directly impacts their salary review. ...
Expand Thread Making sense of "affected employee" in Minnesota
01/11/2008 13:08 - Judy Hall
HELP!! OSHA 1910.136(a), which states the employer shall ensure that each "affected employee" uses protective footwear where there is a danger of foot injuries due to falling or rolling objects....
Expand Thread Traction on Ice
01/05/2008 09:55 - No One Get's Hurt!
I am trying to locate slip resistant boots that have built-in ice "studs". I have strap on cleats, and can purchase other slip-on/strap-ons, but the ones I need are an actual buckle-up artic...
Expand Thread Apropriate manufacturing footwear Ugg Boots ?
01/03/2008 13:29 - bmulanix
We have a employee who works in manufacturing and in the warehouse that is wearing Ugg Boots at work. Our policy is vague and says no open- toed shoes or sandals. I can not seem to convince any other...
Expand Thread Affects of cold temperatures
12/30/2007 15:00 - ymm1210
I would appreciate anyone's insight regarding the hazard of cold temperature on the human body. Specifically, we currently allow drivers to wear shorts during the winter time while delivering product...
Expand Thread Underground Electric Contact
12/19/2007 04:22 - deshleman
If your equipment comes in contact with an underground electrical service, is it better to be on steel tracks or rubber tires? Mini-excavator with rubber track, same question, but should the blade be up...
Expand Thread Safety awards program
12/13/2007 23:03 - spzahoor
I have introduced the safety awards program for my organization. In this regard I need any useful data which may includes Individual targets, team targets and safety implementation. I will be thankful...
Expand Thread EPA PPE Categories
12/13/2007 08:21 - hankroberts
Ran across this: "PPE to protect the body against contact with known or anticipated chemical hazards has been divided into four categories by the Environmental Protection Agency (EPA) (i.e., Level...
EPA PPE Categories
12/13/2007 07:45 - hankroberts
Ran across this: "PPE to protect the body against contact with known or anticipated chemical hazards has been divided into four categories by the Environmental Protection Agency (EPA) (i.e., Level...
TODAY'S BUSINESS CHALLENGES IN MANAGEMENT
12/13/2007 03:45 - spzahoor
CAN ANY BODY HAVE PPT PRESENTATION ON "TODAY'S BUSINESS CHALLENGES IN MANAGEMENT INVOLVE PERFECTION IN PLANNING, ORGANIZING, STAFFING, LEADING & CONTROLLING TO MEET FAST CHANGING CONDITIONS OF...
Expand Thread Cold Weather Plan for ERP
12/10/2007 08:41 - gordondg
I'm looking for a cold weather plan that we can add to our ERP for the company. This is needed for Canadian cold weather
Expand Thread HEAD COUNT SOP
12/07/2007 04:07 - spzahoor
We are looking for a SOP for head count. We are facing acute problem in head counting, since our workers used to leave working place without intimation his uperiors, as well as they left frequenrly and...
Expand Thread Definations
12/06/2007 14:30 - timh
I am looking for good definations for the following terms; high hazard work, medium hazard work, low hazard work, please and thank you. Tim
Health and Safety Policies
12/04/2007 09:03 - Tam
I am looking for a good company health and safety policy for a General Contractor. Any samples or any help would be greatly appreciated. My e-mail is tpedersen@omicronaec.com Tks
Expand Thread What specific hazards are related to oil exploration or oil fields.
12/03/2007 02:41 - spzahoor
What specific hazards are related to oil exploration or oil fields. If you have material for my reading to upgrade my skill as well to prepare some training material out of those then please send me. Also...
Football players
11/28/2007 04:13 - lpratt
Living in Dallas most of my life I have seen first hand what players do and how they conduct themselves in bars. I feel that alot of the players have not had any substantial amount of money or moral support...
Expand Thread Fatigue, Frustration, Rushing and Complacency the 4 contributing factors to incidents/accidents
11/21/2007 15:28 - Coppertop
does any one have article on this ?? thought Safety x change did but cant find it now.
Expand Thread Pallet Jack Safety
11/20/2007 14:58 - bmulanix
We have several employees who move loads on pallet jacks by pulling with both arms behind their backs. This method seems that it would put more strain on muscles and be more prone to causing injury than...
Expand Thread suicide knobs
11/14/2007 11:55 - robyn7d
Does anyone know whether or not suicide knobs on forklifts are legal or illegal? I cannot find anything specifically stated in the OSHA regs but have been told that they are.
copper theft
11/12/2007 08:33 - boogerknows
Does anyone have information on how to prevent copperwire theft of pole ground and neutral wires on power distribution systems?
copper theft
11/12/2007 08:32 - boogerknows
Does anyone have information on how to prevent copperwire theft of pole ground and neutral wires on power distribution systems?
Leadership training materials
11/03/2007 06:05 - abrimsg
Does anyone have LEADERSHIP training materials in powerpoint for supervisors and managers that they would like to share? Do email to abrimsg@yahoo.com.sg
removal and installation procedure for heavy equipment tires
10/31/2007 07:50 - tda
Does anyone have a SOP for R&I of heavy equipment tires that they would like to share?
Sample Noise Survey (using Dosimeters) Report Format
10/26/2007 11:31 - TroyT
As the title says, would anyone be willing to share past reports you've done. I've done SLM surveys, but not this. Thanks in advance for your help. Troy-
Expand Thread safety manager job description
10/25/2007 10:25 - SAFETYMUSH
Does anybody have a safety manager job description they would be willing to share?
Safety as a Value
10/25/2007 06:39 - del.forbes
While conducting a safety leadership workshop in India. An interesting discovery was made after asking the attendees to provide the number of people affected if they were to lose their life doing their...
Expand Thread Behavior Based Safety (BBS)
10/24/2007 05:51 - r2b273
As I read more and more articles on BBS I can't help but wonder what it must be like to have the luxury of a permanent or near-permanent cadre of employees. The construction industry, and moreso one dominated...
Inspection on hoses
10/21/2007 20:20 -
Good morning staff. I have several hoses from 3 "rubber with steel cable which they are used with compressed air from 3" in my company. These hoses are attached equipment located. I need implement...
Expand Thread Online newsletters
10/16/2007 12:31 - christinaH
Can anyone tell me about some good online safety sites/newsletters that deals strictly with Canadian and/or Alberta reg's, codes, etc? I have all the reg's and codes, I am looking more for updates, news,...
Expand Thread for hire
10/15/2007 11:14 - Staysafe
I'm looking for safety inspectors, any idea I can find resumes?
heating in plastic shed
10/12/2007 09:16 - MikeTL
We are trying to set up an warm-up shed for on top of our silos for when maintenance has to do any work up there mid-winter. The current idea is to mount a typical plastic regular variety garden shed up...
Corrective Actions
10/11/2007 14:41 - lesafety
I'm looking for a good working form for corrective actions. If you have any please e-mail them to me at lejaeger@telus.net thanks everyone.
OSHA 10hr. general ind. training PPT (Hospitals)
10/09/2007 11:55 - Pungazz
i was wondering, hoping that someone out there would have a kick butt presentation on the OSHA 10hr for general industry? this will be specific to plant services employees for a hospital if you want specifics....
Expand Thread Noise Survey Equpment Rentals in DC Metro Area
09/28/2007 12:48 - TroyT
I'm trying to locate a vendor in the DC metro area that rents noise survey equipment, specifically dosimeters. Would anyone have contact info. of a vendor that you've had a good experience with? Thanks...
Expand Thread Forklift Seatbelts
09/25/2007 09:25 - mikehenson
I have an operator that asked if there was any leeway in OSHA's fork-lift standard concerning seatbelts in a wharehouse situation with smooth level floors.
JHA / SOP FOR BORING OF EARTH PIT
09/24/2007 22:07 - spzahoor
Could you provide me JHA / SOP on boring for earth pits. A serious injury occured at plant during boring. The tripod slipped ocer worker and broken his both wrists.
New Process/Equipment Checklist
09/24/2007 16:51 - jeffar
I am looking for some examples of a checklists used for new machinery/process lines for both pre installation and post installation. The OSHA machine guarding checklist gives some info but I am looking...
Expand Thread Safety Bulletins
09/13/2007 21:16 - steve958
Hello, I'm looking for a few one-paged safety bulletins that I can post near time clocks and coffee break rooms. Does anyone have any they are willing to share. Thanks...please send to steve958@comcast.net
Expand Thread ASTM D120
09/11/2007 09:41 - jekelj
Is anyone familar testing and inspection requirments of electrical gloves and tools? Its ASTM F496 In service care of insulated gloves. I am familare with the pre-use inspection.
Expand Thread Mobile Equipment licenses
09/11/2007 08:32 - PhyllisC
Does anyone know where it is "documented" that all Mobile Equipment operators are to carry their license card on them while they are operating the piece of equipment. Please advise.
Expand Thread forklift
09/07/2007 08:46 - robyn7d
Does anyone know if there is a specific regulation stating that the key needs to be taken out of a forklift when it is not in use?
Expand Thread Substance Abuse Policy/Procedures
09/05/2007 08:05 - Tam
I am looking for some help to put together a Substance Abuse Policy/Procedure for our safety manual. It would be greatly appreciated if anyone could give me some directions or information sources where...
Expand Thread VPP OHS
09/04/2007 22:07 - ben@ecompliance.ca
Are there any consultants that are familiar with and work on the VPP in the US whom I can contact for information
Expand Thread Canada vs. USA
09/04/2007 13:37 - HRManager
I was just wondering if someone could help me with the websites that Safety and HR professionals use in the US for general HR and Safety legislation which are comparable to the ones used in Canada (Ontario)...
Expand Thread the safety job board
08/27/2007 14:48 -
I would like to know if there is a screening process that potential employers go through before they are permitted to post job openings. If not, I would like to tell everyone to be extremely careful when...
Expand Thread Safety Committees
08/23/2007 10:36 -
I have strategically assisted departments in forming safety committees and some of the feedback I've been receiving is that they do not know whether or not they are on track and that they would like some...
Expand Thread Backhoe Certification
08/20/2007 13:08 - kelso
I keep hearing people and reading classified ads, relative to "certified operators". I am familiar with crane certifications, forklift, etc, however; I do not know of any certification, relative...
Expand Thread Natural Death at the Work Site
08/20/2007 12:30 - lynnegrose
Does anyone know the procedure or legal ramifications of a natural death at the work site? This would include liability for packing up personal belongings, etc.
Expand Thread Safety Certification
08/20/2007 07:12 - smarsh
Has anyone ever heard of the IBOEHS? Is the accreditation as solid as the CSP? Maybe the CPS is just better known in America... Can anyone give me some input? The price seems low compaired to the CSP.
PROCESS SAFETY -Petrochemical
08/16/2007 20:34 -
Please suggest above mentioned subject related trg /course /literature
Expand Thread safety or not discipline
08/16/2007 13:22 - blenart
In Canada can someone be summarily disciplined (aka terminated) STRICTLY on the basis of the employer being an "at-will-employer" in their documented (and co-signed) company policies at time...
Near Miss reporting vs actaul incidents
08/14/2007 07:17 - Rider1
Does anyone have any info showing how effective near miss reporting is at lowering actual incidents? I know it is effective but have no stat within our project to show how effective.
Expand Thread I-35W Bridge Collapse
08/13/2007 06:44 - rcpsafety
I tried to make a comment about how the innocent victims were being ignored in this tragedy and how it is either a political statement being spouted by everyone, or another comment ignoring the fact that...
Expand Thread Canadian Safety Regs
08/09/2007 09:15 - mdoucette
We were just awarded a project in Canada and need to get studying up on the Regulations. My main question is who regulates safety requirements for construction and where can I get a copy of the standards?...
Expand Thread Kid Friendly Activities?
08/06/2007 04:17 - melissa
We are in the process of planning our annual Family Day where employees can bring their families to visit the CIA headquarters compound. My problem is Safety doesn't seem so exciting to the kids! Older...
Kid Friendly Activities?
08/06/2007 04:15 - melissa
We are in the process of planning our annual Family Day where employees can bring their families to visit the CIA headquarters compound. My problem is Safety doesn't seem so exciting to the kids! Older...
Expand Thread prescription drug samples
08/02/2007 07:09 - MNJenRN
I am sure this has come up several times on the board, but I didn't see it when looking through most recent posts... If a physician gives an employee samples of a prescription drug, but no actual prescription,...
Required exits for fired heaters in refinerys
08/01/2007 13:26 - JSantos
HELP! I'm trying to research where it clearly stipulates how many "means of egress" are required from a fired heater with elevated platforms in a refinery? Any advice??
Expand Thread Compliance Weekly
07/30/2007 12:34 - jvankirk
Does anyone know where I can locate the 4 "Critical Error Reduction Techniques" that Larry Wilson described in his article, Compliance vs Injury Prevention- How do you choose? Part 2 of 2?
fall rescue plan
07/30/2007 10:50 - terrid
I have to prepare a written rescue plan for fall protection. We have a verbal plan but what I need is help to make it clear & concise on paper. does anyone have a written template that meets OSHA...
Expand Thread three points for contact ( make it your goal)
07/26/2007 09:47 - darellwhite
I have had some incidents where workers have not used three point contact. I was looking for some information on this topic to do a safety stand down with power point highlites. If possioble please email...
Brown Recluse spiders
07/24/2007 08:26 - ger2007
It isn't very conceivable that brown recluse can be found almost anywhere - especially in CA. I'll refer you to an excellent article by Rick Vetter, Department of Entomology, University of California,...
Expand Thread Near Miss vs Incident
07/20/2007 09:36 - IainGT
I'm new here & I'm pretty sure that this subject has bee flogged to death but........ Has anyone out there got a clear definition of a Near Miss as opposed to an Incident? We argued this for over...
Expand Thread Job Hazard Assessments-Alberta
07/19/2007 14:23 - superg24tdf5
Our job requires our staff to go to many worksites everyday infact it would turn into the thousands over a year is there anyone who would know a way to get around the JHA for every job site. Or is there...
Compliane Data base
07/16/2007 12:12 - EBunker
I'm looking for a data base to assist our safety personnel in providing compliance background info, code violations, NFPA, Life Safety, National Electric code violation number. This info will assist the...
Expand Thread Activity Hazard Analysis for Insulation
07/13/2007 09:22 - yourfriend
Anybody has written " Activity Hazard Analysis for Insulation " if somebody has is please email me at" klikefriend@yahoo.com " please any information of AHA will be helpful. thanks...
Camping Safely
07/11/2007 11:25 - mwhite
Let's not forget the importance of not keeping any food in the tents. If camping in a National Park there is the danger of wild animals such as the bear. They follow the scent of the food and stop at nothing...
Expand Thread certified safety
07/10/2007 08:53 -
I am new to the safety field,and I am looking to attend some classes to get certified in this field.I am hoping someone could refer me to a good program that is recognized to where the certificate actualy...
Expand Thread New Hire Training
07/05/2007 05:44 - dave kannianen
I agree with Dave Duncan's view that New hire training is critical. We've all seen or personally experienced the "Here's what you do and here's how you do it, Now get to work" system of training....
GOLF CARTS/UTILITY VEHICLES Creating a training program
07/05/2007 05:02 - Roger1
In your recent article, July 5, the article lists wearing seat belts in golf carts. I have questioned this before and no real answer. I am not aware of any manufacturer that has seat belts as a standard...
PPT PRESENTATIONS ON PRECAUTION REGARDING RAINY SEASON/MONSOON
06/30/2007 06:11 - spzahoor
I am searching for powerpoint presentations on precas regarding rainy season / monsoon. Syed Perwez Zahoor Engineer (HSE) - GPP - PPL s_zahoor@ppl.com.pk
Expand Thread New Employee Checklist
06/27/2007 13:41 - bbreslin
I am looking for a new employee checklist containing all the required OSHA topics (RTK, EAP). Anyone have a fairly complete form?? Thanks in advance
Expand Thread falls to lower levels
06/21/2007 12:23 - smiths
I'm looking for information on falls to lower levels. Specifically incident rates and severity in the trucking industry (loading and unloading)- but other industries too. Any good resources/ studies...
Expand Thread Proper Lifting Techniques
06/21/2007 05:26 - HRManager
I am doing a safety talk this month on proper lifting techniques and wanted to know if anyone knew of a resource where I could find step by step diagrams of proper lifting procedures. Thanks
Expand Thread 1st Aid/Medical Supplies
06/14/2007 07:27 - robyn7d
My company 1st Aid supply closet looks like a Rite-Aid. In addition to the minimum requirements for 1st Aid (bandages, gloves, etc.) they carry everything from asprin to Pepto-bismal to cough syrup. ...
Contract Employees (Temps)
06/13/2007 12:37 - Loretta
When you have a person from a contract temp agency, you need to train them just like any other new employee. Does Anyone have any special things they do for contract employees since the nature of their...
Blood Born Pathogens Procedure
06/13/2007 12:34 - Loretta
I am looking for a procedure for handing Blood Born Pathogens that meets the OSHA standards. If you have one please email to LBennett@PVSChemicals.com
Expand Thread OHSA requirement - San Antonio, Texas
06/12/2007 13:51 - emadrid
Can somebody provide me some tips or guidelines to start my safety program for our San Antonio Texas Plant.
Expand Thread Bulk Storage of Compressed Gas Cylinder with Single Chain Arrangement
06/08/2007 00:04 - drkher
I am looking for the standard for srorage of the compressed gas cylinder-vertical (either acelylene or oxygen) specific to the secured arrangement. Say for example 50 gas cylinders are stored with single(common)...
Expand Thread Life Safety Presentation
05/31/2007 07:32 - JSantos
Guys/Gals, I'm needing to put together a presentation on Life Safety and it's next week. Do any of you (please) know of a resource or presentation I could get to present?? Thanks
ergonomic policy/procedure
05/30/2007 13:44 - MNJenRN
Anyone willing to share an ergonomics program/policy?? I'd much appreciate it!!
Expand Thread Management of Change.. huh?
05/29/2007 10:20 - HSE gal
I need information on "Management of Change" with respect to oilfield activities. I am going through an AUDIT currently. I need to devise a "Management of Change" checklist, policy,...
Expand Thread Training Video
05/28/2007 07:53 - mstuber
I am looking for a video that has Charlie Morecraft and Scott Geller in it. It is called "The dock worker meets the Doctor". Can anyone tell me where I can find it? Thanks
Expand Thread Lightning Safety
05/25/2007 02:58 - Kipyegon
I work for a company which has installed two lightning detection systems to warn of an impending danger of a lightning strike. Anyone with sites which gives guidelines on evacuation of personel? Any input...
Expand Thread occupational health providers
05/24/2007 18:12 - M&M Safety 1
What is advise for difficult physician health care provider?
Expand Thread computer monitors
05/17/2007 13:21 - rsteffen
I work in a control room and I'm trying to find some information on multiple monitor ergonomics. I sit and look at 8 monitors. 4 across at eye level and 4 stacked on top. I wear bi focals and have to tilt...
Expand Thread Safety Investigation report
05/15/2007 16:10 - pacoj
Hello everyone, I,m new to the safety field and one of my first assigments is to investigate a some issues related to custodians, can anyone share some of their procedures or posibly a report? thanks you...
HSE WORKERS TRAINING COURSES IN URDU
05/15/2007 05:52 - spzahoor
Have you know the site for HSE workers training courses in Urdu?. Please guide me. My workers do not understand English. s_zahoor@ppl.com.pk
Fatigue Management Programs
05/14/2007 13:24 - Coppertop
Does any one have a copy or example of fatigue Management programs they would like to share? would really appreciate it.
Most sought for courses in safety training
05/11/2007 23:39 - abhimanyu2k2
Dear friends! I would be glad if some of you come forward to discuss what are the most important courses and companies/web-sites providing these courses.How do these companies market these services and...
Frame reinforcement on transmission floor jack
05/10/2007 13:12 - tda
In one of our shops we have a floor jack that the frame was bent on by overloading. My interpretation of the O.H.&S. Regulations in Saskatchewan is, that we should be able to reinforce the sides of...
Expand Thread FREE SAFETY VIDEOS
05/09/2007 02:27 - spzahoor
I am searching for any web site for free Safety and HSE videos specially Urdu Safety videos. Syed Perwez Zahhor Engineer (HSE) - GPP HSE DEPARTMENT, PAKISTAN PETROLEUM LIMITED SUI GAS FIELD, SUI-80,000 BALUCHISTAN,...
Expand Thread SAFETY TALKS ON POWERPOINTS
05/04/2007 03:10 - spzahoor
Have you know about safety / tool box talks on powerpoints? Any website? How to Review and display HSE safety talks on monthly basis and impart its training awareness to concerned staff in the department...
Expand Thread Modified Work Program
05/01/2007 09:18 - tamal
I am looking for a modifed work program to add to our safety program. Can anyone throw me a bone? Thanks
Expand Thread